STAK Cómo funciona
Every STAK lamp is built from individual pieces that twist and lock together. Whether you want to add a piece, swap a color, or take it apart for moving, here's how it works.
Stackable by Design
Start small, build it up, and change it later anytime.
Where to Use Your STAK
Table or Desk Lamp
Use with the included cord and dimmer. Place on any flat surface.
Wall Sconce
Add a wall mount accessory (sold separately) to hang your lamp on any wall.
Hanging Pendant
Swap your lamp cord to a pendant cord (sold separately) to hang it from the ceiling.
How to Build Your STAK
Assembly:
- Stack body pieces in your desired order. Twist each piece clockwise until you feel a click.
- Thread the lamp cord through the lamp from bottom to top
- Attach the socket cup by sliding the cord through the side slot, then seat the socket into the top body piece
- Attach the base and twist clockwise until you feel a click.
- Screw in the LED bulb
- Place the lampshade on top and gently twist clockwise until it stops (no click—don't force it.)
Disassembly:
- Gently twist the lampshade counterclockwise and lift off
- Unscrew and remove the bulb
- Pull up on the socket to expose the cord
- Slide the socket cup out of the top body piece and pass the cord through the side slot
- Twist the base counterclockwise and remove
- Slide the socket and cord down through the lamp body
- Twist body pieces counter-clockwise to separate them